Marine Civil Engineering
Deep marine provides a full range of services to the marine civil engineering industry. U/W and topside coded welding and concreting, burning, dredging, salvage and much more.
Below some of our latest jobs presented along with a short explanation.
-
Coded welding & burning
-
Dredging
-
Pricking
-
Salvage and Recovery
-
Concreting
-
Anode installation
-
Underwater painting and caoting of all structures
-
Scour protection
-
Contaminated water and high risk environment
Pier construction and installation
Construction of 10 meter length pier for the international marina in Eilat, Israel. Job included construction of the pier, installation and casting 10 cubic meters of concrete as part of the design. Welds were checked and approved by welding engineers.
Burning of 80m long pier
Underwater burning of support legs to remove 80 m length old pier for the Israeli navy. The pier was cut in sections and held by a crane. Diver then Burned the support legs of the sheet pile wall and the section was lifted and removed.
Metal debris removal from the sea
Locating and recovery of steel and other debris from the bottom of the Red Sea, Eilat, working as sub contractor. Job was to locate and recover 10 Tons of metal debris scattered along a 20,000 sq/m area. The debris was located and lifted to the surface via crane or lifting bags on to a barge.
Flash bottom pricking
Sub-bottom sampling, working as sub contractor. Job was to establish the bottom material type down to -3 m blow the surface. In order to achieve the objective 3/4" 4 meter length steel pipe were used connected to a water pipe creating a jet wash that allowed the pipe to penetrate into the ground.